Lexmark XM1140 User's Guide Page 249

  • Download
  • Add to my manuals
  • Print
  • Page
    / 309
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 248
Action Yes No
Step 2
a Replace the fuser. For more information on installing the fuser, see
the instruction sheet that came with the part.
b Resend the print job.
Do compressed images still appear?
The problem is solved. Contact
customer
support.
Gray background on prints
ABCDE
ABCDE
ABCDE
Leading edge
Trailing edge
Action Yes No
Step 1
Check if Allow Background Removal is set to Off.
a From the General Settings menu, set Allow Background Removal to
On.
b Resend the print job.
Did the background disappear from the prints?
The problem is solved. Go to step 2.
Step 2
Adjust the toner darkness to a lighter setting.
a From the Quality Menu, select a lower value to reduce toner density.
4 is the factory default setting.
If Print Mode is set to Black Only, then a setting of 5 increases toner
density and darkness for all print jobs.
b Resend the print job.
Did the background disappear from the prints?
The problem is solved. Go to step 3.
Step 3
Reinstall the toner cartridge.
a Remove the cartridge.
b Install the cartridge.
c Resend the print job.
Did the background disappear from the prints?
The problem is solved. Go to step 4.
Troubleshooting 249
Page view 248
1 2 ... 244 245 246 247 248 249 250 251 252 253 254 ... 308 309

Comments to this Manuals

No comments