Lexmark XM1140 User's Guide download pdf (Page 232)

Serial option [x] error [54]

Try one or more of the following:

• Make sure that the serial cable is properly connected and is the correct one for the serial port.

• Make sure that the serial interface parameters (protocol, baud, parity, and data bits) are set correctly on the printer

and computer.

• From the printer control panel, select Continue to continue printing. For non‑touch‑screen printer models, press

to confirm.

• Turn off the printer, and then turn it back on.

SMTP server not set up. Contact system administrator.

From the printer control panel, select Continue to clear the message. For non‑touch‑screen printer models, press

to confirm.

Note: If the message appears again, then contact your system support person.

Some held jobs were not restored

From the printer control panel, select Continue to delete the specified job. For non‑touch‑screen printer models,

press

to confirm.

Note: Held jobs that are not restored stay in the printer hard disk and are inaccessible.

Standard network software error [54]

Try one or more of the following:

• From the printer control panel, select Continue to continue printing. For non‑touch‑screen printer models, press

to confirm.

• Turn off the printer and then turn it back on.

• Update the network firmware in the printer or print server. For more information, visit the Lexmark support Web

site at

http://support.lexmark.com.

Standard USB port disabled [56]

From the printer control panel, select Continue to clear the message. For non‑touch‑screen printer models, press

to confirm.

Notes:

• The printer discards any data received through the USB port.

• Make sure the USB Buffer menu is not set to Disabled.

Troubleshooting 232

1 2 ... 227 228 229 230 231 232 233 234 235 236 237 ... 308 309

No comments

Lexmark XM1140 User's Guide Page 232