Lexmark 3455 User Manual download pdf (Page 73)

6 Remote Configuration of Printer IPDS

Settings

Most IPDS emulation settings stored in the printer (the default IPDS settings) can be

changed remotely by sending a special IPDS text job to the printer. This method of

changing settings is useful during printer installation to set the IPDS option settings to

the values recommended by your system administrator. At a later time, if it is

determined by your system administrator that an option setting should be changed, the

setting may be changed easily on a single printer or all installed printers.

6.1 Settings That Require Operator Intervention

Two option setting changes may require operator intervention at the printer. Operator

intervention to power OFF and power ON the printer is required so the host will

recognize the changes. The message Recycle PWR to activate value may be displayed

on the printer operator panel when the following option settings are changed.

IPDS Emulation Changing to the IBM 3812/16 emulation (240 dpi) from a 4028,

43xx, or 3112/16 emulation (300 dpi) or changing from a 4028,

43xx, or 3112/16 emulation to the IBM 3812/16 emulation,

displays the message Recycle PWR to activate value and halts the

printer. Changing between 4028, 43xx, or 3112/16 emulations does

not require recycling of the printer power.

Duplex Control

Setting this option to a new value causes the message Recycle

PWR to activate value to be displayed and halts the printer.

6.2 Option Values Which Can Not Be Changed

Remotely

The following IPDS options can not be changed remotely.

Trace Functions

IPDS Version

1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 180 181

No comments

Lexmark 3455 User Manual Page 73