Lexmark 3455 User Manual download pdf (Page 128)

128

8.10 IPDS Device Address and IPDS Buffer Sizes

Settings

These settings for the Adapter for SCS only appear when the SIMM for IPDS is

detected in the printer.

The IPDS Device Address is used to select the twinax address for the IPDS emulation

or to disable the IPDS emulation. IPDS Buffer Sizes is used to select the size of the

data/command buffer used by the IPDS emulation when receiving data/commands from

the twinax host.

From the operator panel, do the following:

1. Press Menu> until NETWORK MENU displays. Press Select.

2. Press Menu> to display NETWORK OPTION 1. Press Select. (This

example assumes the Adapter for SCS is installed in option connector 1.)

3. Press Menu> to display SCS MENU 1. Press Select.

4. Press Menu> to display IPDS OPTIONS. Press Select.

Press Menu> until you find the following settings:

IPDS Dev. Addr.

(Address can be “0” – “6” or “Disable”)

Note: If the IPDS emulation and the SCS emulation are given the same

address, the SCS emulation will be used and the IPDS emulation will

be ignored. The word DUPLICATE will display in the operator panel.

IPDS Buf. Size

256

(256 or 1024)

Note: The 1024 byte buffer has the fastest transfer rate, but it isn’t compatible

with some older IBM equipment.

IPDS Buf. Size appears as an option in the printer panel only if the

IPDS Dev. Addr. is enabled (address = 0 - 6).

1 2 ... 123 124 125 126 127 128 129 130 131 132 133 ... 180 181

No comments

Lexmark 3455 User Manual Page 128