Lexmark 3455 User Manual download pdf (Page 47)

4.5.3 IPDS Envelope Paper

This option selects the envelope default formatting size for the IPDS Envelope media

source (most often it is the IPDS Number 64 (40H)). This option setting applies to

Input Tray Mappings set to "Manual Env" or "Env Feeder".

You can do one of the following:

Use the printer setting Manual Env Size.

Use the printer setting Env Feeder Size (if installed).

Select a different envelope size from the IPDS Menu. The selection applies

to both Manual Env and Env Feeder.

Selecting a specific size under the IPDS Menu will change the media size selected for

the Postscript and PCL emulations, too. It is recommended that the IPDS value remain

at the default of use Prtr Setting and the specific media size be selected under PAPER

SIZE from the printer's PAPER MENU.

Prtr (printer) Setting* Use the envelope size from the Manual Env Size or Env

Feeder Size printer default setting.

7 ¾ Envelope 7 ¾ Monarch envelope paper (3.875” x 7.5”)

9 Envelope 9 Commercial envelope paper (3.875” x 8.875”)

10 Envelope 10 Commercial envelope paper (4.125” x 9.5”)

DL Envelope DL envelope paper (110mm x 220mm)

C5 Envelope C5 envelope paper (162mm x 229mm)

B5 Envelope B5 envelope paper (176mm x 250mm)

Other Envelope The Other Envelope setting enables the use of non-

standard envelopes. The media size returned to the host is

specified with IPDS menu option Other Env Size. Refer to

section 4.5.8 Other Env Size on page 53 for more

information. The default media size returned to the host is

215.9 x 355.6 mm (8.5 x 14.0 in.). The position of the

printed data has to be adjusted by the host or by the print

application. This is necessary as the IPDS starting position

(0,0) often will be outside the physical paper. How the

printed data has to be adjusted, depends on which envelope

edge is printed first. Refer to the figure below matching

your printer.

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 180 181

No comments

Lexmark 3455 User Manual Page 47