Lexmark 3455 User Manual download pdf (Page 137)

137

2. Problem:

The message 36 Resolution Reduced displays and the printer stops.

Solution:

The printer memory is full and the page cannot be printed at the selected IPDS

Resolution. Press Go and the page is printed at a lower resolution. If this is a

constant problem and you want to print at the higher resolution, you need to add

more memory to the printer.

This message is an informational message on some Optra models. The printer will

display the message and continue printing the job without operator intervention. If

this message continues to appear when printing jobs, add more memory to the

printer.

For information on the minimum recommended installed memory, see appendix

C. Recommended memory on page 171.

3. Problem:

Sometimes an IPDS memory exception is reported to the host.

Solution:

The memory may be used by PCL or PostScript. It cannot be used by IPDS. You

need to do one or more of the following:

A. Set Resource Save to “Off” to allow permanent downloaded resources

from PostScript and PCL jobs to be deleted. Resource Save is found under

SETUP MENU on the printer operator panel. Try reprinting the job after

powering the printer OFF and ON.

B. There may be insufficient printer memory to print the IPDS job with the

selected IPDS resolution. Select a lower IPDS Resolution and try

reprinting the job. If using the Adapter for SCS, you must power the

printer OFF and ON for this change to take effect.

1 2 ... 132 133 134 135 136 137 138 139 140 141 142 ... 180 181

No comments

Lexmark 3455 User Manual Page 137