Lexmark 3455 User Manual download pdf (Page 87)

7.3 Configuring a MarkNet Pro External Print

Server

To enable IPDS printing with the MarkNet Pro several settings must be changed.

Changes to MarkNet Pro settings can be made using the appropriate network printer

utilities. For more information on how to change these settings, refer to your Lexmark

MarkNet Pro network adapter manual which came with your print server.

Network Adapter User's Guide or

Network Adapter Hardware Setup

7.3.1 Printing a MarkNet Pro Setup Page

The MarkNet Pro Microcode Level must be: 2.9.15 (or greater)

To see the code level, you need to print the setup page. To print the MarkNet Pro setup

page, press and release Menu and Test simultaneously. Under the Network Card

heading on the Setup Page, look for Firmware Revision.

For more information, see Lexmark’s Network Printer Utility Guide.

If you need to update your MarkNet code level, contact the Lexmark Technical Support

Center. MarkNet Pro firmware updates are also available from the Lexmark web site at

http://www.lexmark.com.

7.3.2 Setting the MarkNet Pro TCP/IP Protocol Settings

The following TCP/IP protocol settings must be set in order for the host to send jobs to

the printer through the MarkNet Pro. Contact your network administrator if you need

help with these settings.

Activate

Yes

Set IP Address

157.184.67.102

(Address available from your network administrator)

Set IP Netmask

255.255.255.0

(Appropriate netmask for your network)

1 2 ... 82 83 84 85 86 87 88 89 90 91 92 ... 180 181

No comments

Lexmark 3455 User Manual Page 87