Lexmark 3455 User Manual download pdf (Page 127)

127

8.8 Twinax Interface Settings

Only three setting options have to be considered to set up the Adapter for SCS for

IPDS operation:

SCS Device Address

IPDS Device Address

IPDS Buffer Sizes

Note: Be certain to set the correct twinax address for both the SCS address and the

IPDS address before physically connecting your printer to the twinax wiring

system. If you were to incorrectly enter the same address used by another

device, you would disable that device. If you do not know your printer’s

correct address, see your network administrator.

8.9 SCS Device Address Setting

The SCS Device Address is used to select the twinax device address for the SCS

emulation or to disable the SCS emulation if you don’t want to use it. From the printer

operator panel, do the following:

1. Press Menu> until NETWORK MENU displays. Press Select.

2. Press Menu> to display NETWORK OPTION 1. Press Select. (This

example assumes the Adapter for SCS is installed in option connector 1.)

3. Press Menu> to display SCS MENU 1. Press Select.

4. Press Menu> to display SCS OPTIONS. Press Select.

Press Menu> until you find the following setting:

SCS Dev. Addr.

(Address can be “0” – “6” or “Disable”)

Note: If the IPDS emulation and the SCS emulation are given the same address,

the SCS emulation is used and the IPDS emulation is ignored. The word

DUPLICATE is displayed in the operator panel.

1 2 ... 122 123 124 125 126 127 128 129 130 131 132 ... 180 181

No comments

Lexmark 3455 User Manual Page 127