Lexmark 3455 User Manual download pdf (Page 85)

7.2.1 Selecting the MarkNet Internal Print Server TCP/IP

Protocol Settings

From the printer operator panel, do the following:

1. Press Menu> until the NETWORK MENU displays. Press Select.

2. Press Menu> until the NETWORK OPTION 1 displays. Press Select.

(This example assumes the MarkNet internal print server is installed in

option connector 1.)

3. Press Menu> until you see NETWORK 1 SETUP. Press Select.

4. Press Menu> until you see TCP/IP. Press Select.

Here you find the following settings:

Activate

Yes

Enable BOOTP

Yes

(Yes, if you use a BOOTP server.)

(No, if you set the IP address another way.)

Enable DHCP

Yes

(Yes, if you use a DHCP server.)

(No, if you set the IP address another way.)

Enable RARP

Yes

(Yes, if you use a RARP server.)

(No, if you set the IP address another way.)

Set IP Address

157.184.67.102

(Address available from your network administrator)

Set IP Netmask

255.255.255.0

(Appropriate netmask for your network)

Set IP Gateway

157.184.67.1

(IP address of the IP gateway)

Set Hostname

Name

(Necessary when using DHCP server.)

1 2 ... 80 81 82 83 84 85 86 87 88 89 90 ... 180 181

No comments

Lexmark 3455 User Manual Page 85