Lexmark 3455 User Manual download pdf (Page 43)

4.3.15 Trace Functions

This option determines if the Trace function is enabled. Trace data is sent to either the

serial or parallel port. Unless you have a computer running a capture program attached

to the serial or parallel port to receive the trace data, the printer will hang Busy and

display IPDS on the first line of the operator panel and TRC on the second line of the

operator panel.

Note: The Trace function is used by service personnel for troubleshooting and

service.

Disable* Disable Trace

Serial Output Enable serial port for output of trace data

Parallel Output Enable parallel port for output of trace data

Note: Some Optra models do not have a serial port standard on the printer. A Tri-

Port Adapter must be installed in printer option card slot one to perform

serial tracing on these models.

Note: This option cannot be changed remotely.

4.3.16 IPDS Version

This option displays the current IPDS level in the second line of the operator panel.

The IPDS level is also printed whenever the Menu Settings are printed. Refer to

section 2.2 Printing the Menu Settings on page 13.

Note: This option cannot be changed remotely.

Note: The IPDS Version option is only available on IPDS code level 9241 or

above.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 180 181

No comments

Lexmark 3455 User Manual Page 43