Lexmark XC2132 User's Guide download pdf (Page 262)

3 Remove the extra flash memory.

4 Connect the power cord to a properly grounded electrical outlet.

5 Turn the printer back on.

Too many trays attached [58]

1 Turn off the printer.

2 Unplug the power cord from the electrical outlet.

3 Remove the extra trays.

4 Connect the power cord to a properly grounded electrical outlet.

5 Turn the printer back on.

[Type] imaging kit low [84.xy]

Note: The type can be a black imaging kit, or a black and color imaging kit.

You may need to replace the imaging kit. If necessary, touch Continue on the printer control panel to clear the message

and continue printing.

[Type] imaging kit nearly low [84.xy]

Note: The type can be a black imaging kit, or a black and color imaging kit.

If necessary, touch Continue on the printer control panel to clear the message and continue printing.

[Type] imaging kit very low, [x] estimated pages remain [84.xy]

Note: The type can be a black imaging kit, or a black and color imaging kit.

You may need to replace the imaging kit very soon. For more information, see the “Replacing supplies” section of the

User’s Guide.

If necessary, touch Continue on the printer control panel to clear the message and continue printing.

Unformatted flash detected [53]

Try one or more of the following:

• From the printer control panel, touch Continue to stop the defragmentation and continue printing.

• Format the flash memory.

Note: If the error message remains, then the flash memory may be defective and needs to be replaced.

Waste toner bottle nearly full [82.xy]

You may need to order a waste toner bottle. If necessary, touch Continue on the printer control panel to clear the

message and continue printing.

Troubleshooting 262

1 2 ... 257 258 259 260 261 262 263 264 265 266 267 ... 340 341

No comments

Lexmark XC2132 User's Guide Page 262