Lexmark 35S5701 User Manual download pdf (Page 253)

Supply needed to complete job

Do either of the following:

• Install the missing supply to complete the job.

• Cancel the current job.

Too many flash options installed [58]

1 Turn off the printer.

2 Unplug the power cord from the electrical outlet.

3 Remove the extra flash memory.

4 Connect the power cord to a properly grounded electrical outlet.

5 Turn the printer back on.

Too many trays attached [58]

1 Turn off the printer.

2 Unplug the power cord from the electrical outlet.

3 Remove the extra trays.

4 Connect the power cord to a properly grounded electrical outlet.

5 Turn the printer back on.

Unformatted flash detected [53]

Try one or more of the following:

• From the printer control, select Continue to stop the defragmentation and continue printing. For non‑touch‑screen

printer models, press

to confirm.

• Format the flash memory.

Note: If the error message remains, then the flash memory may be defective and need to be replaced.

Weblink server not set up. Contact system administrator.

Select Continue to clear the message. For non‑touch‑screen printer models, press to confirm.

Note: If the message appears again, then contact your system support person.

Solving printer problems

• “Basic printer problems” on page 254

• “Hardware and internal option problems” on page 256

• “Paper feed problems” on page 258

Troubleshooting 253

1 2 ... 248 249 250 251 252 253 254 255 256 257 258 ... 328 329

No comments

Lexmark 35S5701 User Manual Page 253