Lexmark 5400 User Manual download pdf (Page 44)

Load up to Make sure

10 envelopes

• The print side of the envelopes faces you.

• The stamp location is in the upper left corner.

• The envelopes are designed for use with inkjet printers.

• The envelopes are loaded in the center of the paper support.

• The paper guides rest against the edges of the envelopes.

Warning: Do not use envelopes that have metal clasps, string ties, or metal

folding bars.

Notes:

– Do not load envelopes with holes, perforations, cutouts, or deep

embossing.

– Do not use envelopes that have exposed flap adhesive.

– Envelopes require more drying time. Remove each envelope as it exits,

and allow it to dry to avoid ink smudging.

25 sheets of labels

• The print side of the labels faces you.

• The top of the labels feeds into the printer first.

• The adhesive on the labels does not extend to within 1 mm of the edge

of the label.

• You use full label sheets. Partial sheets (with areas exposed by missing

labels) may cause labels to peel off during printing, resulting in a paper

jam.

• The labels are loaded in the center of the paper support.

• The paper guides rest against the edges of the labels.

Note: Labels require more drying time. Remove each sheet of labels as it

exits, and allow it to dry to avoid ink smudging.

50 transparencies

• The rough side of the transparencies faces you.

• If the transparencies have a removable strip, each strip faces away from

you and down toward the printer.

• The transparencies are loaded in the center of the paper support.

• The paper guides rest against the edges of the transparencies.

Notes:

• Transparencies with paper backing sheets are not recommended.

• Transparencies require more drying time. Remove each transparency

as it exits, and allow it to dry to avoid ink smudging.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 126 127

No comments

Lexmark 5400 User Manual Page 44