Lexmark 7500 Series User Manual Page 131

  • Download
  • Add to my manuals
  • Print
  • Page
    / 227
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 130
Wireless Setup Menu
Use this To
Network Name View the current Service Set Identifier (SSID) being
used. An SSID is the name of a wireless local area
network. You cannot change this menu item.
Wireless Signal Quality Select a Wireless Signal Strength.
TCP/IP Menu
Internet Protocol (IP) specifies the format of packets, also called datagrams, and the addressing scheme. Most
networks combine IP with a higher-level protocol called Transmission Control Protocol (TCP). TCP enables two
hosts to establish a connection and exchange streams of data. TCP guarantees delivery of data and also guarantees
that packets are delivered in the same order in which they were sent.
Use this To
Enable DHCP Specify Yes or No as the value. DHCP is Dynamic Host
Configuration Protocol. The network automatically
assigns a number for the network information.
Set IP Address Access the Set IP Address Menu.
Set IP Netmask Access the Set IP Netmask Menu.
Set IP Gateway Access the Set IP Gateway Menu.
Understanding the Maintenance menu
The Maintenance menu lets you check ink levels and handle various tasks related to print cartridges.
1 From the control panel, press or repeatedly until Maintenance is highlighted.
2 Press .
The Maintenance menu appears.
The following table explains the function of each menu item in the Maintenance menu.
Use this To
View Ink Levels See the current ink levels for both print cartridges.
Clean Cartridges Clean the print cartridge nozzles of both cartridges.
Align Cartridges Align both cartridges to improve print quality.
Change Print Cartridges See a short video on the display with instructions on how to change print
cartridges.
Print Test Page Print a test page to see if the printer is functioning properly. The test page
lists some information about the printer.
Call Diagnostics Run modem diagnostic routines.
Reset Defaults Reset all of your previously defined user default settings to the factory
default settings.
Note: Items such as phone lists, time, date, and country code are not
reset. All other user default settings are reset. For more information, see
“Resetting factory default settings” on page 206.
Understanding the printer
131
Page view 130
1 2 ... 126 127 128 129 130 131 132 133 134 135 136 ... 226 227

Comments to this Manuals

No comments