Lexmark C 910 User Manual download pdf (Page 75)

Verify printer setup

Printing a network

setup page

If the printer is attached to a network, print a network setup page to

verify the network connection. This page also provides important

information that helps you configure for network printing.

Note: If an optional MarkNet

card is installed in slot 1, you

see Print Net1 Setup on the

display. If the card is installed in

slot 2, you see Print Net2 Setup.

1 Press Menu until you see Utilities Menu, and then press

Select.

2 Press Menu until you see Print Net Setup, and then press

Select. The network setup page prints and the printer returns

to Ready status.

3 Check the first section on the network setup page and confirm

that Status is “Connected.”

If Status is “Not Connected,” your LAN drop may not be active

or your network cable may be malfunctioning. Consult your

network support person, and then print another network setup

page to verify that you are connected to your network.

Save the network setup page for later use.

UTILITIES MENU

Select

Return

Stop

What do I do next?

Task Go to page…

Configure for TCP/IP 70

Install printer drivers 72

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 91 92

No comments

Lexmark C 910 User Manual Page 75