Lexmark C 910 User Manual download pdf (Page 41)

Attach cables

Step 5: Attach cables

The Lexmark C910 can be attached to a network or locally (directly to

a computer).

Network printing You can attach your printer to a network using standard network

cables.

A 10BaseT/100BaseTX Fast Ethernet port is standard on the

Lexmark C910n and Lexmark ABCdn. You can add a Token-Ring or

10Base2 Ethernet port to any printer model by installing an optional

MarkNet internal print server.

To attach the printer to a network:

1 Make sure the printer is turned off and unplugged.

2 Connect the printer to a LAN drop or hub using standard

cabling that is compatible with your network:

— Token-Ring, Ethernet 10BaseT, or Ethernet 100BaseTX

networks (Category 5) use an RJ-45 connector

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 91 92

Setup Guide 1
October 2001 1
FCC emissions information 2
Safety information 2
Conventions 2
Edition: October 2001 2
Table of contents 3
Introduction 5
Other sources of 6
Step 1: Unpack your printer 7
Considering 9
Printer with 13
Installing the printer 15
Installing a 16
550-sheet drawer 16
Installing an optional 18
5 Slide in the duplex unit 19
7 Tighten the thumbscrews 20
8 Close the duplex unit door 20
Attaching the docking frame 22
Attaching the guide rail 24
10 Close the cable holder 27
Attaching the paper 29
Step 4: Install memory and 30
To install a... Go to page 32
Memory card 27 32
Firmware card 28 32
Hard disk 30 32
Option card 31 32
2 Unpack the firmware card 35
Installing an 37
3 Unpack the option card 38
Reinstalling the system 40
Step 5: Attach cables 41
Note: All Windows operating 43
2 Open the front door 44
Right top cover latch 45
Install printer supplies 46
Remove any shipping tape and 46
Installing the 47
3 Remove one of the 48
4 Remove the tape from the 48
Installing the toner 50
Colored label 51
Attaching the Quick 53
Reference booklet 53
Attaching an adhesive 54
4 Close the front door 56
Step 7: Load paper 57
Load paper 59
4 Release the paper guide 60
Set the paper size 63
Set the paper type 64
Loading the 65
The multipurpose tray can be 68
Loading the high 69
Step 8: Verify printer setup 73
Printing a menu 74
Printing a network 75
Setting the printer 76
IP address 76
Verifying the 77
IP settings 77
Configuring for 77
Pull Printing 77
Supported printer drivers 79
Supported printing methods 79
Non-NDPS (queue-based) 81
Installation instructions 81
Supported connections 81
Identifying printer 83
Distributing the 84
Storing the Quick 84
Reference 84
Statement of limited warranty 85
P/N 12N0401 92
E.C. 2N0016 92

Comments to this Manuals

No comments

Lexmark C 910 User Manual Page 41

Comments to this Manuals

Related products and manuals for Printers Lexmark C 910