Lexmark 4227 User Manual download pdf (Page 41)

Chapter 3: Using the Operator Panel

Using the Operator Panel

Using the Function Menus

This section describes the function menus and how to set them. To set

functions:

1 Press Start/Stop.

2 Press Menu to enter the function menu.

3 Press Item ↓ or Item↑ until the function menu you want appears on

the display.

Note: The selectable function menu is different depending on the

selected data stream mode (IBM PPDS or Epson emulation)

and the Interface mode (Parallel, RS-232 or RS-422).

Press Next

 to enter that menu item.

5 Press Item ↓ or Item↑ until the value you want appears on the

display.

6 Press Store to save the selected value.

Note: The currently selected default value is displayed with an

asterisk (∗).

If you have to change the optional value in another function menu,

repeat steps 3 through 5. Otherwise, go to the next step.

7 To print the function setting, press Item ↓ or Item↑ until the Print

Settings message appears on the display.

8 Press Start/Stop to print the current setting values.

9 Press Quit to exit the function menus.

Note: If you have changed any settings, the printer performs a

Power-On Self Test. If you did not change any settings, the

printer enters the not-ready state.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 159 160

No comments

Lexmark 4227 User Manual Page 41