Lexmark Platinum Pro900 User Manual download pdf (Page 18)

Scanning

ADF Scanner glass

Use the ADF for multiple-page

documents.

Note: The ADF is available only on

select models. If you purchased a

printer without an ADF, then load

original documents or photos on the

scanner glass.

Use the scanner glass for single pages, small items (such as postcards

or photos), transparencies, photo paper, or thin media (such as

magazine clippings).

Tips for scanning

• When using the ADF, adjust the ADF paper guide to the width of the original document.

• When using the scanner glass, close the scanner lid to avoid dark edges on the scanned image.

• Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as

magazine clippings) into the ADF. Place these items on the scanner glass.

• Select the PDF file type if you want to scan multiple pages and save them as one file.

• To initiate network scanning from the printer, make sure that “Enable network scan to computer” is

selected in the General tab of the Scan Center. This is available only in Mac OS X version 10.6.

Scanning to a local or network computer

1 Load an original document faceup into the ADF or facedown on the scanner glass.

2 From the home screen, navigate to Scan to Computer:

Scan > Scan to Computer

3 Touch USB-Connected Computer or the name of a network computer.

The local or network computer is the destination that will receive the scan. Wait until the printer has

finished downloading a list of the scan applications available on the selected computer.

Notes:

• If the printer is connected only to a local computer, then the printer will automatically download

a list of the scan applications.

• You may be prompted to enter a PIN if the computer requires it. Enter the PIN using the keypad.

• To assign a computer name and a PIN to the computer, see the Help for the printer software

associated with your operating system.

4 Select an application, and then touch Accept.

5 Select the color, resolution quality and the original image size. If necessary, touch Accept each time

you make a selection.

6 Press to start scanning.

The scan is complete when the application you selected in step 4 opens on the destination computer, and

the scan appears within the application as a new file.

Scanning to a flash drive or memory card

Before you begin, make sure your flash drive or memory card is not write protected.

1 Load an original document faceup into the ADF or facedown on the scanner glass.

2 From the home screen, navigate to Scan to Memory Device:

Scan > Scan to Memory Device

3 Insert the flash drive or memory card.

Notes:

• The printer reads only one memory device at a time.

• If a flash drive is inserted into the USB port while a memory card is in the card slot, then a message

appears on the display prompting you to select which memory device to use.

4 Select the output file type you want to create.

Note: Select the PDF file type if you want to scan multiple pages and save them as one file.

5 Select the color, resolution quality, and original image size. If necessary, touch Accept each time you

make a selection.

6 Press to start scanning.

The scan is complete when a message appears on the printer control panel indicating that the file you

scanned has been saved.

Scanning directly to e-mail using the printer software

For Windows users

1 Load an original document faceup into the ADF or facedown on the scanner glass.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 26 27

Comments to this Manuals

No comments

Lexmark Platinum Pro900 User Manual Page 18

Comments to this Manuals

Related products and manuals for Printers Lexmark Platinum Pro900