Lexmark Z600 Series User Manual download pdf (Page 58)

Resolving unsuccessful or slow printing

• The printer is set as the default printer. To set the printer as the default:

1 From your desktop, double-click the Z600 Series printer icon.

2 From the Printing menu, choose Select Default Printer.

After you check these items, try printing a test page.

Printing a test page

1 From the Apple menu, choose Control Panels Z600 Series Control Panel.

2 From the Cartridges tab, click Print Test Page.

• If the test page prints, the printer is working properly.

• If the test page does not print, continue with the following section or refer to the printer

software Help for further troubleshooting information.

Test page does not print

For help, first see “Troubleshooting checklist” on page 51, and then:

• If the paper is jammed, see “Clearing paper misfeeds or jams” on page 60.

• Make sure the printer is not held or paused. To check the printer status:

1 From your desktop, double-click the Z600 Series printer icon.

2 Make sure the Hold button is not selected.

3 Try printing your test page again. If it still does not print, see:

– “Solving printer software installation problems” on page 52

– “Solving network printing problems, if the printer is connected to a network adapter”

on page 55

– “Resolving unsuccessful or slow printing” on page 57

Alignment page does not print

Make sure:

• You completely removed the transparent tape and sticker from the back and bottom of the

print cartridges.

• You installed the cartridges correctly. For help, see “Install the cartridges” on page 45.

• You loaded the paper correctly and did not force the paper into the printer.

• If you are connected to a network with a Lexmark adapter, the indicator lights are on. For

more information, see the adapter documentation.

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 74 75

No comments

Lexmark Z600 Series User Manual Page 58